Maraging C350 Round Bar
- Home
- Maraging C350 Round Bar
Maraging C350 Round Bar
Advantages of Maraging C350 Round Bar:
• Good yield strengths
• Ultimate tensile strengths
• Good toughness, flexibility and impact strengths
• Great fatigue strength
• Hardness and wear resistance for many tooling purposes
Vascomax C350 Round Bar’s excellent workability:
• High resistance to crack spread
• Readily formed in the cold, warm, hot
• Good weldability with or without preheating and post-heating
• Excellent polishability
Maraging C350 / Vascomax C350 Round Bars Specification
Specification : AMS 6515, MIL-S-46850, ASTM A538
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Round Bars : Outside Diameter in the range of 4mm to 500mm
Bright Bars : Outside Diameter in the range of 4mm to 300mm
Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
Square Bars : 18mm – 47mm (11/16″ to 1-3/4″)
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle Etc.
Maraging C350 Round Bars are manufactured with alloys that are essentially carbon-free and have the protective atmosphere required at the time of aging and are produced by vacuum arc processing’s.This material composition of Maraging C350 Round Bars may be nitrided. Maraging C350 is usually supplied in the annealed condition where the microstructure Vascomax C350 Round Bars consists of fine martensite before final heat treatment and then processes with other servings.
Applications where Maraging C350 Round Bars are used:
• Missile casings
• Tooling
• Ordnance mounting blocks
• High-performance motorsport components
• Couplings
• Jet engine and helicopter driveshafts
• Load cells
• Landing gear
Vascomax C350 Round Bars are also useful in other sectors such as wind tunnel models, missile and rocket motor cases, landing gear components. Hence they have the best demands over industries.
Equivalent Grades of Maraging C350 Round Bars
| STANDARD | WERKSTOFF NR. | UNS | GB | BS |
| Vascomax 350 | 1.6356 | K93120 | 1Cr18Ni9 | S162 |
Maraging C350 Round Bar Chemical Composition Chart
| Weight% | Ni | Co | Mn | Si | C | B | P | S | Al | Mo | Ti | Zr |
| Maraging 350 | 18.50 | 12.0 | 0.10 max | 0.10 max | 0.03 max | 0.003 | 0.01 max | 0.01 max | 0.10 | 4.8 | 1.40 | 0.01 |
Maraging C350 Round Bar Mechanical Properties
| Material | 0.2 % Yield Strength ksi | Ultimate Tensile Strength ksi | Elongation in 4D(%) |
| Maraging 350 | 330 | 350 | 8 |