Monel 500 Sheet & Plate
- Home
- Monel 500 Sheet & Plate
Monel 500 Sheet & Plate Manufacturers in India
Monel 500 Sheet & Plate Manufacturers in India, Monel K500 Plate is made up of a nickel copper alloy that has 63% nickel and 28% copper minimum with carbon, manganese, silicon, sulfur and iron in the composition. Navstar Steel is a leading manufacturer and supplier of the Monel K500 Plate products in different dimensions and types. There are thicker plates and thinner sheets along with coils and strips. The material has very high melting point of 1350 degrees Celsius which makes it applicable in high temperature applications. The Monel K500 Sheet also has a higher tensile strength and yield strength with high density.
Monel K500 Coil, K500 Monel Hot Rolled Plates Mumbai, India, view ASME SB 127 Monel Cold Rolled Plates Weight Chart
The minimum yield strength is 240MPa and the minimum tensile strength is 550MPa. The melting point of the UNS N05500 Strip is at 1350 degrees Celsius. The strips are low width pieces of plates and sheets. These are used to produce pipes and tubes as well as in applications that require linings. The other version of the sheets and plates is the Nickel Alloy K500 Coil. The coils are useful in heat exchanging applications such as heat exchangers, condensers and boilers. The material also has high thermal conductivity.
The specification of these plates and sheets is ASTM B127. There are K500 Monel Hot Rolled Plates and cold rolled plates as different finishes to the same material. The sheets and plates also range in thickness from 0.3mm to 20mm, width of 1000mm to 2000mm and a length range of 2000mm to 6000mm. The ASME SB 127 Monel Cold Rolled Plates support grinding, polishing and cutting operations. The material is highly machinable and workable. The material is highly resistant to oxidation, stress cracking, pitting and crevice corrosion attacks. Please contact us for more information on the products such as the K500 Monel Alloy Flat Plates, their prices and other variations of them.
K500 Monel Alloy Flat Plates supplier, ASME SB 127 Monel K500 Chequered Sheets, Monel K500 Decorative Sheets, Check Alloy UNS N05500 Circle Dimension
UNS N05500 Strip Dimensions Standard
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Polished plate (not brushed) | 11–24 | 60 |
| Temper rolled plate Mexinox only | 13–29 | 48 |
ASTM B127 K500 Alloy Plate Metric Dimensions
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
Monel K500 Coil Density
| UNS N05500 Monel K500 Plate density |
| g/cm3 : 8.44 lb/in.3 : .0.305 |
K500 Monel Hot Rolled Plates Melting point
| ASTM B127 Alloy K500 Plate melting range |
|
ASME SB 127 Monel Cold Rolled Plates Sizes In Mm
| Stocked Sizes | |
|---|---|
| Size (in inches) | Size (in mm) |
| .125″ | 3.18mm |
| .134″ | 3.40mm |
| .156″ | 3.96mm |
| .187″ | 4.75mm |
| .250″ | 6.35mm |
| .312″ | 7.92mm |
| .375″ | 9.53mm |
| .500″ | 12.7mm |
| .601″ | 15.9mm |
| .750″ | 19.1mm |
| .875″ | 22.2mm |
| 1″ | 25.4mm |
| 1.125″ | 28.6mm |
| 1.250″ | 31.8mm |
| 1.500″ | 38.1mm |
| 1.750″ | 44.5mm |
| 2″ | 50.8mm |
| 2.500″ | 63.5mm |
| 3″ | 76.2mm |
K500 Monel Alloy Flat Plates Equivalent Material Grade
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Monel K500 | 2.4375 | N05500 |
Thickness Of ASME SB 127 Monel K500 Chequered Sheets
| Thickness | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 inches | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 inches | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 inches | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 inches | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 inches | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 inches | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 inches | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 inches | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 inches | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 inches | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 inches | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 inches | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 inches | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 inches | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 inches | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 inches | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
High strength ASTM B 127 K500 Monel Strip, Buy directly from K500 Alloy Blank Sheets. ASTM ASTM B 127 Monel Perforated Coil, Monel K500 Plate Specification
Material Specification Chart of Monel K500 Decorative Sheets
| Specifications | ASTM / ASME SB 127 |
|---|---|
| Size | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | 0.1mm to 12 mm Thk |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
DIN 2.4375 Monel K500 Shim Sheets, ASTM B 127 Alloy K500 Polished Cold Drawn Plate, Alloy K500 Slatting Coil, Monel K500 Strips,Check Proprties of UNS N05500 Foils
Composition Chart of Alloy UNS N05500 Circle
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
|---|---|---|---|---|---|---|---|
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
ASTM B 127 K500 Monel Strip Mechanical Properties Chart
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
K500 Alloy Blank Sheets Prices
| UNS N05500 Strip Price List | Nickel Alloy K500 Sheet Per Unit (INR) |
|---|---|
Alloy K500 Plate/Sheet | $26.00-$28.00/ Kilogram |
Copper nickel alloy price per kg monel k500 plate/sheet | $10.00-$30.00/ Kilogram |
Nickel copper alloy monel k500 plate | $18.00-$38.00/ Kilogram |
| Nickel Alloy K500 UNS N05500 2.4375 Monel K500 Corrosion Resistant plate sheet price | $20.00/ Kilogram |
Monel 500 Sheet & Plate Manufacturers in India
Monel 500 Sheet & Plate Manufacturers in India, Siddhgiri Overseas is a leading Monel 500 Sheet & Plate Manufacturer in India, known for delivering premium quality products to customers across India. With years of experience in the metal industry, Siddhgiri Overseas has established itself as a trusted name among Monel 500 Sheet suppliers in Mumbai, Monel 500 Plate exporters in Gujarat, and Monel K500 Sheet stockists in India.
We specialize in manufacturing and supplying Monel 500 Sheets and Plates that meet global standards of quality, durability, and performance. Our sheets and plates are widely used in industries such as marine engineering, chemical processing, oil & gas, and aerospace. As one of the top Monel K500 Plate manufacturers in Maharashtra, we ensure our products offer excellent resistance to corrosion, high strength, and durability even in extreme conditions.
At Siddhgiri Overseas, we understand the importance of timely delivery and consistent quality. Our facility in Mumbai is equipped with modern machinery and expert technicians to produce top-grade Monel 500 Sheets in India. We cater to bulk requirements for customers looking for Monel 500 Plate suppliers in Ahmedabad, Monel K500 Sheet dealers in Chennai, and Monel Alloy 500 stockists in Pune.
Why Choose Siddhgiri Overseas?
Premium Quality Products
Competitive Prices
On-time Delivery Across India
Customized Size & Thickness
Serving Locations: Mumbai, Delhi, Chennai, Bangalore, Ahmedabad, Pune, Surat, Kolkata, and more
As a reputed Monel 500 Plate Manufacturer in India, we use only certified raw materials and conduct strict quality control to maintain international standards. We supply to various clients across India including Monel K500 Sheet buyers in Hyderabad, Monel Alloy 500 Plate users in Jaipur, and Monel 500 stockholders in Vadodara.
Whether you are looking for small quantities or large industrial orders, Siddhgiri Overseas has the capability to fulfill your needs. We are one of the few Monel 500 Sheet Manufacturers in India offering mill test certificates and third-party inspection as per customer requirement.
Applications of Monel 500 Sheets & Plates:
Offshore and marine applications
Heat exchangers
Pump shafts and fasteners
Valves and chemical processing equipment
Aerospace and defense components
With a strong network across India, Siddhgiri Overseas serves as the go-to source for Monel 500 Sheet and Plate suppliers in India. We export as well, catering to global markets looking for reliable Indian manufacturers of Monel Alloy 500 Plates.
If you’re searching for trusted Monel K500 Sheet Manufacturers in India, your search ends here. Siddhgiri Overseas is your one-stop destination for all types of Monel Sheets and Plates in India with fast delivery and unmatched quality.